The ResMed AirSense 10 AutoSet with HumidAir and ClimateLineAir is a premium pressure-adjusting device with integrated humidifier, cellular connectivity and advanced event detection.
AutoSet devices adjust pressure on a breath-by-breath basis to suit your personal breathing needs throughout the night. As a result, you receive the minimum pressure required for effective therapy, and these lower average pressures improve comfort.
AutoRamp with sleep onset detection delivers a low pressure to help patients fall asleep with ease. Once the patient is asleep, it comfortably ramps up the pressure to ensure the prescribed level is delivered the moment they need it.
The HumidAir heated humidifier is designed to seamlessly integrate with the device and offer relief from dryness and congestion. The humidifier is simple to use. The device automatically detects when the HumidAir is connected. Once you have filled it with water and connected it, you are ready to go. The humidity level can be adjusted to suit your preference.
The tubing is designed to maintain the temperature of the humidified air as it passes through the tube. Because the temperature sensor is built into the mask end of the ClimateLineAir tube, the temperature will remain at your preferred setting, regardless of changes in the temperature or humidity in the room. The tube temperature can be set to anywhere between 60 and 86°F (16 and 30°C).
Expiratory Pressure Relief
Proven to enhance comfort during CPAP therapy1, EPR decreases the patient’s CPAP pressure during exhalation on a breath-by-breath basis. This ensures therapy is more acceptable during the initial CPAP trial phase, during ramp only and throughout the night.
This feature allows the patient to start therapy by breathing in, instead of pressing the ‘Start’ button.
LCD screen with my options
The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings. The screen has a menu that can show options on ramp time, humidity level, mask fit, pressure relief, smartstart, mask type, and run warmup.
The built-in ambient light sensor adjusts brightness of the screen based on the light in the room and turns off automatically.
Data tracking with SD card
The following data can be tracked: usage, events per hour, average usage, leak rate, and AHI.